I run queries throughout the day that can return 8 million+ rows easily. Granted, it takes few minutes to run, but it has never caused a single issue with overheating even on slim pc’s.
This makes no fucking sense. 60k rows would return in a flash even on shitty hardware. And if it taxes anything, it’s gonna be the ram or cpu- not the hard drive.
In my experience, the only time that I’ve taxed a drive when doing a database query is either when dumping it, or with SQLite’s vacuum, which copies the whole thing.
For a pretty simple search like OP seems to be doing, the indices should have taken care of basically all the heavy lifting.
I literally work with ~750,000 line exports on the daily on my little Lenovo workbook. It gets a little cranky, especially if I have a few of those big ones open, but I have yet to witness my hard drive melting down over it. I’m not doing anything special, and I have the exact same business-economy tier setup 95% of our business uses. While I’m doing this, that little champion is also driving 4 large monitors because I’m actual scum like that. Still no hardware meltdowns after 3 years, but I’ll admit the cat likes how warm it gets.
750k lines is just for the branch specific item preferences table for one of our smaller business streams, too - FORGET what our sales record tables would look like, let alone the whole database! And when we’re talking about the entirety of the social security database, which should contain at least one line each in a table somewhere for most of the hundreds of millions of people currently living in the US, PLUS any historical records for dead people??
Your hard drive melting after 60k lines, plus the attitude that 60k lines is a lot for a major database, speaks to GLARING IT incompetence.
You’ve got it all wrong, in traditional computer terminology the “hard drive” is the box that sits under the desk that collects cat fluff and cigarette tar.
I don’t think I’ve seen a brand new computer in the past decade that even had a mechanical hard drive at all unless it was purpose-built for storing multiple terabytes, and 60K rows wouldn’t even take multiple gigabytes.
I have when a misconfigured spark job I was debugging was filling hard drives with tb of error logs and killing the drives.
That was a pretty weird edge case though, and I don’t think the drives were melting, plus this was closer to 10 years ago when SSD write lifetimes were crappy and we bought a bad batch of drives.
Have you ever heard of case of overheating hard drives within the last decade?
Plus, 60k is nothing. One of our customers had a database that was over 3M records before it got some maintenance. No issue with overheating lol
I run queries throughout the day that can return 8 million+ rows easily. Granted, it takes few minutes to run, but it has never caused a single issue with overheating even on slim pc’s.
This makes no fucking sense. 60k rows would return in a flash even on shitty hardware. And if it taxes anything, it’s gonna be the ram or cpu- not the hard drive.
In my experience, the only time that I’ve taxed a drive when doing a database query is either when dumping it, or with SQLite’s vacuum, which copies the whole thing.
For a pretty simple search like OP seems to be doing, the indices should have taken care of basically all the heavy lifting.
I literally work with ~750,000 line exports on the daily on my little Lenovo workbook. It gets a little cranky, especially if I have a few of those big ones open, but I have yet to witness my hard drive melting down over it. I’m not doing anything special, and I have the exact same business-economy tier setup 95% of our business uses. While I’m doing this, that little champion is also driving 4 large monitors because I’m actual scum like that. Still no hardware meltdowns after 3 years, but I’ll admit the cat likes how warm it gets.
750k lines is just for the branch specific item preferences table for one of our smaller business streams, too - FORGET what our sales record tables would look like, let alone the whole database! And when we’re talking about the entirety of the social security database, which should contain at least one line each in a table somewhere for most of the hundreds of millions of people currently living in the US, PLUS any historical records for dead people??
Your hard drive melting after 60k lines, plus the attitude that 60k lines is a lot for a major database, speaks to GLARING IT incompetence.
Pretty sure I run updates or inserts that count over 60k fairly often. No overheats. Select queries sometimes way higher.
You’ve got it all wrong, in traditional computer terminology the “hard drive” is the box that sits under the desk that collects cat fluff and cigarette tar.
/s …?
I don’t think I’ve seen a brand new computer in the past decade that even had a mechanical hard drive at all unless it was purpose-built for storing multiple terabytes, and 60K rows wouldn’t even take multiple gigabytes.
I have when a misconfigured spark job I was debugging was filling hard drives with tb of error logs and killing the drives.
That was a pretty weird edge case though, and I don’t think the drives were melting, plus this was closer to 10 years ago when SSD write lifetimes were crappy and we bought a bad batch of drives.
Reminds me of those 90s ads about hackers making your pc explode.
Musk gonna roll up in a wheelchair, “the attempt on my life has left me ketamine addicted and all knowing and powerful.”